उत्पाद जानकारी पर जाएं
1 का 1


Veracity VHW-HWPS-B4-LL HIGHWIRE Powerstar Base 4 Linklock TAMPER-PROOF EOC & POE

Veracity VHW-HWPS-B4-LL HIGHWIRE Powerstar Base 4 Linklock TAMPER-PROOF EOC & POE

नियमित रूप से मूल्य Rs. 74,108.72
नियमित रूप से मूल्य Rs. 74,108.72 विक्रय कीमत Rs. 74,108.72
बिक्री बिक गया
टैक्स शामिल। शिपिंग की गणना चेकआउट पर की जाती है।

VHW-HWPS-B4-LL Datasheet

HIGHWIRE Powerstar Base 4 Linklock is connected to standard HIGHWIRE Powerstar (Camera), Duo or Quad units in exactly the same way as a normal Base 4 unit. The Linklock technology monitors the connection for tampering or interference.

  • Tamper-proof Ethernet and POE over coax.
  • 4 tamper-proof channels per Base unit.
  • Tampering or interference with cabling shuts down channel.
  • Relay contact alarm output on tamper, with reset pins.
  • Ideal for replacing encoders when upgrading to IP cameras.
  • Automatic configuration for simple installation.
  • Full duplex 100Base-TX performance on each coax.



Connector type : BNC 75 ohm x 4

Cable type : Any 75 ohm coaxial (other impedances supported)

Range : Up to 300 metres [1000ft] on RG59 or 500 metres [1640ft] on RG11 at full rate

Bandwidth : 200 Mbps (total up + down) x 4


Connector type : RJ45 with optional SFP socket for fibre

Cable type : Cat 5/6 Patch or crossover, auto-detected or as per optional SFP device

Rate : Gigabit Ethernet, Full-duplex (1000Base-TX) with auto-negotiation


LINKLOCK Trigger : On disconnection or tamper of coax or network cable

LINKLOCK Alarm : Relay switch output (NO, COM, NC) on screw terminals


LINKLOCK Reset : Via reset pins on screw terminals connector

Connector : 5-pin removable screw terminal connector


Status indicators : HIGHWIRE coax link - flashes red when LINKLOCK is triggered Ethernet link/activity (BASE) - flashes red when LINKLOCK is triggered See Quickstart Guide for LED indicator table and diagnostics. Guide also online


Device power : 5W rising to 10W under full POE load

POE Out : IEEE 802.3af (POE) or IEEE 802.3at (POE Plus) up to 25W per channel

Power input : 57V DC, up to 6A via a 2-pin detachable screw terminal (supplied) or a 2-pin Micro-Fit power connector


Dimensions : L 173mm (including BNC connectors) W 110mm H 22mm

Weight : 356g [12.5oz

Operating temperature : 0ºC to 40ºC [32ºF to 104ºF]

Relative humidity : 85% non-condensing

Compliance : FCC, CE, UKCA, RoHS, REACH

पूरा विवरण देखें