Veracity VCS-4P1-MOB CAMSWITCH 4 Mobile 12V-24V POE PLUS NETWORK SWITCH

VCS-4P1-MOB Datasheet

CAMSWITCH 4 Mobile is designed to be powered by a 12V to 24V DC power source (e.g. a vehicle battery). Up to 4 POE devices can be connected and powered by the device with a total power budget of 80W. The fifth port serves as the uplink port to a mobile NVR for example.

• 802.3af POE / 802.3at POE Plus compatible outputs
• Converts a wide input voltage range to POE levels
• Up to 80 watt power budget
• Auto-configuring 10/100 Ethernet switch
• 4 POE ports and 1 uplink port
• Rugged enclosure with adjustable mounting brackets

SPECIFICATION

POWER INPUT 

OWER INPUT Connector : Detachable screw terminal

Voltage : 8.5 - 40V (minimum startup voltage is 10.5V, supports engine cranking and reduce overdischarge) DC only (contact Veracity for 24V AC applications)

Fusing : The use of an external fuse is recommended. Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow type

POE OUTPUTS

POE standard : IEEE 8023.af / IEEE 802.3at compatible Not isolated from DC input; for use in closed system transport applications; connected devices must be IEEE compliant Veracity enhanced POE supports maximum efficiency and range

POWER BUDGET

24V input : 80 watts total camera power

12V input : 80 watts ( reduce to 65 watts for max 30ºC temperature rise above ambient )

<12V input : 60 watts ( reduce to 50 watts if voltage can drop below 10V ) POE power conversion produces heat; the above limits are for horizontal mounting with ventilation Installation in enclosed spaces will cause additional heating and power limiting Warning: enclosure may become hot in operation

PHYSICAL/ENVIRONMENTAL

Dimensions : L 110mm / 131mm with side clips W 100mm including connectors H 40mm

Mounting (brackets inc.) : 5mm mounting holes on 122mm centres

Weight : 290g [10.2oz] (VCS-4P1-MOB) / 350g [12.3oz] (VCS-8P2-MOB)

Operating temperature : -10oC to 50oC [14oF to 122oF]

Relative humidit : Up to 85%, non-condensing

Compliance : CE, FCC, RoHS